Add products by adding codes
Semi-automatic four-post lift 4T - REDATS L-420
- A four post lift with 4 tons’ capacity. Raises up to 1750 mm. It can be prepared for wheel alignment.
REDATS L-420 - essential information to tell your clients
Here’s the most important data about this lift:
- Manufacturer: REDATS
- Engine output: 2.2 kW
- Type: semi-automatic for alignment
- Raising height: 250 - 1750 mm
- Raising time: ca. 50 seconds
- Lowering time: ca. 50 seconds
- Ramp width: 530 mm
- Ramp height at rest: 250 mm
- Ramp length (without runways): 4250 mm
- Ramp settings: 800 - 950 mm
- Runway lenght: 1010 mm
- Rear axle plates length: 1400 mm
- Wheel alignment turntable: 2 pcs
- Filling rubbers: 2 pcs
- wheel alignment turntable sockets: length: 685 mm + universal adjustment covers
- capacity: 4 tons
- Lifting height: 250 - 1750 mm
- Time to full rise: ca. 50 seconds
- Time to full lowering: ca. 50 seconds
- Runway height (resting position): 200 mm
- Ramp length (without runways): 4250 mm
- Ramp setting: 800 - 950 mm
Why introduce this model to your offer?
This lift might be prepared for wheel alignment.
It will enable your clients to work on longer cars - overall ramp length (without runways): 4250 mm
It raises up to 1750 mm.
Runways prepared for wheel alignment
This REDATS L-420 lift can be used for wheel alignment. It has turntables, as well as central jacks for axles. Special covers allow for changing the position of the turntable or even hiding the hollow for turntables.
Setting the runways
Runways might be adjusted between 800 and 950 mm. The operator can easily set them for both cars with the narrow and wide wheel base. Plus to that, there are special chocks that prevent the car from rolling down the lift.
Designed for longevity
The lift structure is very reliable and stable. Runways are made of top-notch steel. There is no risk of bending or damages, even after years of use. Also, it is made of anti-slippery material, which increases safety.
Safe operations
There are special ratchet devices that get activated if the lift ever goes too high. This means, there is no risk it goes down out of a sudden lowering of the lift, when the pressure goes down. Also, there is a special safety valve that gets activated whenever the pressure gets too high.
Structure you can trust
The power is transferred from the actuator to the run-ways, through the steel ropes. This means less moving parts and longer trouble-free use.
Heavy-duty ropes
By default, the lift is fitted with heavy duty ropes – additional protection against breaking.
